Industrial IoT & Wireless Sensing
HSM-WL Wireless Level Sensor
Submersible or capacitive

HSM-WL technical data
Measurement
- Hydrostatic variant
- Submersible probe, head pressure converted to level
- Capacitive variant
- Coaxial probe, capacitance change converted to level
- Typical applications
- Reservoir high/low level, hydraulic tanks, tankers, building automation, constant-pressure water supply
Electrical
- Local output
- RS485 Modbus RTU, or 0.25–2.5 V analogue
- Wireless uplink
- 4G / LoRa / NB-IoT
- Power
- Wired, battery, or cyclic supply
- Protection
- Designed against RF, surge and EMI
- Compliance
- IEC and CE (EMC)
Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.
Request the PDF datasheet →Industrial IoT & Wireless Sensing
HSM-WLWireless Level Sensor
Submersible or capacitive
Battery-powered level sensor for reservoirs, tanks and networks. Hydrostatic submersible or capacitive sensing, RS485 Modbus or analogue locally, 4G / LoRa / NB-IoT uplink. For sites with no power and no cable route.
Engineering reply · Evaluation samples available · Custom ranges built to order
- Hydrostatic or capacitive sensing
- Suits reservoirs, tanks and networks
- 4G, LoRa or NB-IoT uplink
- Battery or cyclic supply
- RS485 Modbus and analogue local outputs
- CE (EMC) compliant
How it works
Two sensing principles in one product family: a submersible hydrostatic probe that converts head pressure to level, and a capacitive probe that measures the change in capacitance as the level rises. The choice depends on the medium — hydrostatic for clean water in deep wells, capacitive for tanks where a suspended probe is impractical. Both are packaged with the same low-power radio and battery, so a site can mix the two and use one gateway.
Typical applications
- Reservoir and dam level monitoring
- Petrochemical and environmental water networks
- Hydraulic oil tanks and tanker trucks
- Locomotive braking systems
- Building automation and constant-pressure supply
Not certain HSM-WL is the right unit?
Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.
Same family
Other industrial iot instruments

Wireless Pressure Sensor
4G / LoRa / NB-IoT
Battery-powered pressure sensor for unmanned pipeline and network monitoring. Wired, battery or cyclic supply; RS485 Modbus, I²C or 0.25–2.5 V output locally; 4G, LoRa or NB-IoT to the cloud. CE (EMC) compliant with digital temperature compensation.
View specifications
Wireless Temperature Sensor
4G / LoRa / NB-IoT
Battery-powered temperature sensor for remote networks, using a Pt100/Pt1000 element in a 304 or 316 stainless probe. Wired, battery or cyclic supply; RS485 Modbus or analogue locally; 4G, LoRa or NB-IoT uplink.
View specifications
Wireless Gas Sensor
Toxic and combustible
Wireless gas sensor for toxic and combustible gas monitoring in plants and buildings, with wired or battery supply and a choice of wireless uplink. Used for confined-space safety, combustion monitoring, food and beverage process control and medical diagnostics.
View specifications
Industrial Edge Gateway
4G / Wi-Fi / broadband
Edge gateway with 4G, Wi-Fi and broadband uplinks, protocol parsing and edge computing. Local configuration software reports CPU/RAM/ROM, firmware, network state; NAT and port mapping, TLS transport encryption, hardware and software watchdog.
View specifications