Level Sensors & Transmitters
Liquid level is the widest part of our catalogue because no single principle suits every tank. Float switches give a dry contact at one or more discrete points and need no power. Magnetic level gauges read directly from a red-and-white flip column — no electronics at all — and can add a 4–20 mA transmitter for remote indication. Magnetic-induction and magnetostrictive transmitters give continuous 4–20 mA or RS485 output over 3 to 5 metres. Submersible transmitters convert hydrostatic head into a signal and suit deep wells and reservoirs. Capacitive models handle viscous and coating media. Where foam, build-up or aggressive chemistry rules out contact sensing, the microwave switch detects through the wall of the vessel.
What it measures
- Point level
- Continuous level
- Interface
Available outputs
- Dry contact
- Relay
- 4–20 mA
- 0–10 V
- RS485 Modbus
17 models in this family
Sorted by typical duty — workhorse models first

Rod Float Level Switch
1–4 set-points
Discrete level switch with one to four magnetic reed points on a stainless guide rod. Passive dry contacts need no power supply, and the reed elements never touch the liquid. Rod diameter 9–25 mm, pressure to 6.3 MPa, temperature to 150 °C.
View specifications
Rod Float Level Switch
Extended body
The HWS20 shares the HWS10's reed-on-rod principle with a longer, heavier-duty body for deeper tanks and wider mounting spans. Same passive dry-contact output, 1–4 set-points, 6.3 MPa and 150 °C ratings.
View specifications
Illustrative imageCable Float Level Switch
SPDT, 15 A
Injection-moulded float on a flexible rubber cable, switching 15 A at 250 V AC through an SPDT contact. Suits long cable runs, multiple points on one drop, submersible pumps and media carrying granular solids. IP68, specific gravity above 0.6.
View specifications
Magnetic Level Gauge
Top-mounted
Direct-reading magnetic flip gauge for top mounting, 200–6000 mm range, 10 MPa and up to 450 °C. Red-and-white flip column needs no power; a 4–20 mA transmitter and magnetic memory switches can be added for remote indication and alarms.
View specifications
Magnetic Level Gauge
Side-mounted
Side-mounted direct-reading magnetic flip gauge, 200–6000 mm, 10 MPa, up to 450 °C. Flange or threaded connection, optional 4–20 mA output and magnetic memory switches. Explosion-proof and corrosion-resistant construction for hazardous and high-pressure service.
View specifications
Magnetic Induction Level Transmitter
Continuous, 4–20 mA
Continuous level transmitter using a chain of magnetic reed modules inside a stainless guide tube. Range to 3000 mm, 4–20 mA two-wire output, 5 mm resolution, 750 Ω load. Explosion-proof aluminium housing, IP67, flange or threaded mounting.
View specifications
Magnetic Induction Level Transmitter
Local LCD display
Reed-chain level transmitter with a local LCD head showing the level on the vessel. 0–3000 mm, 4–20 mA or 1–5 V output, 5 mm resolution, explosion-proof housing, IP67. Suits tanks where operators need a local readout as well as a control-room signal.
View specifications
Magnetic Induction Level Controller
4 relay outputs
Reed-chain level transmitter with four configurable relay outputs, bright LED display and keypad-set alarm points. 0–3000 mm range, 4–20 mA or 1–5 V output, IP67. Replaces a transmitter plus separate alarm module.
View specifications
Magnetic Induction Level Controller
5 relays, dual supply
Five relay outputs plus 4–20 mA or 1–5 V, keypad-configured, with dual 24 V DC / 220 V AC supply so it can be wired straight into an existing panel. LED display, IP67, range to 3000 mm.
View specifications
Magnetostrictive Level Transmitter
High accuracy
Non-contact magnetostrictive level transmitter, 50–5000 mm, with 0.005 % FS non-linearity and 0.002 % FS repeatability — an order of magnitude better than reed-chain instruments. 4–20 mA, 0–10 V or RS485 output, explosion-proof, IP67.
View specifications
Illustrative imageSubmersible Level Transmitter
Hydrostatic, IP68
Hydrostatic level transmitter for wells, reservoirs and sumps. Range 0.05–300 m, 4–20 mA two-wire, 0.1 or 0.2 accuracy class, ceramic-capacitive or piezoresistive sensor. Ventilated cable prevents condensation, IP68.
View specifications
Illustrative imageSubmersible Level Transmitter
Local display
The HPS10 hydrostatic transmitter with a local display head, so the level can be read at the well head. 0.05–300 m, 4–20 mA, accuracy class 0.1 or 0.2, IP68 probe, condensation-resistant vent.
View specifications
Submersible Level Controller
4 relays
Submersible hydrostatic transmitter with a 24-bit A/D front end, LED display, four relay outputs and 4–20 mA / 0–10 V / 1–5 V analogue output. Range 0.5–300 m, alarm points set from the keypad, stainless and aluminium housing.
View specifications
Submersible Level / Pressure Controller
5 relays, RS485
Five relay outputs plus RS485 Modbus and selectable analogue output, in the 100 mm round case. 0.5–300 m range, dual 24 V DC / 110–220 V AC-DC supply, high-brightness dual-row LED. For pump control with remote supervision.
View specifications
Capacitive Level Controller
5 relays, RS485
Coaxial capacitive level transmitter and controller, 100–5000 mm, with 24-bit A/D, five relays, RS485 Modbus and selectable analogue output. Handles viscous and coating media where float instruments would seize. 316 stainless probe.
View specifications
Capacitive Level Controller
2 relays
Coaxial capacitive level controller with two relay outputs, LED display and 24-bit A/D. 100–5000 mm, 4–20 mA / 0–10 V / 1–5 V selectable, stainless probe. The compact option for simple high/low control on viscous media.
View specifications
Microwave Level Switch
Non-contact through-wall
Microwave resonance switch that detects level through the vessel wall, so nothing protrudes into the process. Works on solids and liquids with dielectric constant above 1.5, ignores foam, and tolerates sticky conductive build-up. PEEK and stainless wetted parts, 115 °C standard or 150 °C with heat sink.
View specificationsOther product families
- Flow Sensors & Switches4
- Pressure Transmitters & Controllers6
- Temperature Sensors & Transmitters10
- Ultrasonic Proximity Sensors7
- Laser Methane Detection3
- Linear Displacement Transducers5
- Analytical Instruments3
- Industrial IoT & Wireless Sensing5
- Motion, Photoelectric & Metering6
Looking across the whole catalogue instead? See all 66 models →
Need a model that is not in the catalogue?
Send us the medium, range, thread and output you need. Most custom configurations are quoted from the factory engineering desk rather than handed to a trading partner.