Level Sensors & Transmitters
HWT100 Magnetic Induction Level Controller
5 relays, dual supply

HWT100 technical data
Measurement
- Range
- 0–3000 mm
- Resolution
- 5 mm
- Output
- 4–20 mA or 1–5 V
- Alarm outputs
- 5 relays
- Load impedance
- 750 Ω
Electrical
- Supply voltage
- DC 24 V or AC-DC 220 V
- Power consumption
- ≤ 3 W
Mechanical
- Working temperature
- −10 to +100 °C
- Working pressure
- 0–1 MPa, or to customer specification
- Guide tube diameter
- Φ9 – Φ25 mm
- Tube material
- Stainless steel 316L / 304
- Housing material
- Aluminium alloy
- Connection
- Flange or thread
- Ingress protection
- IP67
Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.
Request the PDF datasheet →Level Sensors & Transmitters
HWT100Magnetic Induction Level Controller
5 relays, dual supply
Five relay outputs plus 4–20 mA or 1–5 V, keypad-configured, with dual 24 V DC / 220 V AC supply so it can be wired straight into an existing panel. LED display, IP67, range to 3000 mm.
Engineering reply · Evaluation samples available · Custom ranges built to order
- Five relay outputs
- Accepts 24 V DC or 220 V AC supply
- Keypad-set alarm points
- Parallel 4–20 mA or 1–5 V output
- IP67 aluminium housing
How it works
The HWT100 is the top of the magnetic-induction range: five relays instead of four, and a supply that accepts either 24 V DC or 220 V AC. That dual supply matters in retrofit work, where the panel may only have a 220 V rail available and adding a 24 V power supply is an extra component and an extra failure point. Everything else follows the family: reed-chain measurement, LED display, keypad-set points, and a parallel analogue output.
Typical applications
- Retrofit into panels with only a 220 V rail
- Multi-stage pump sequencing
- Tank high-high, high, low and low-low interlocks
Not certain HWT100 is the right unit?
Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.
Same family
Other level instruments

Magnetic Induction Level Transmitter
Continuous, 4–20 mA
Continuous level transmitter using a chain of magnetic reed modules inside a stainless guide tube. Range to 3000 mm, 4–20 mA two-wire output, 5 mm resolution, 750 Ω load. Explosion-proof aluminium housing, IP67, flange or threaded mounting.
View specifications
Magnetic Induction Level Transmitter
Local LCD display
Reed-chain level transmitter with a local LCD head showing the level on the vessel. 0–3000 mm, 4–20 mA or 1–5 V output, 5 mm resolution, explosion-proof housing, IP67. Suits tanks where operators need a local readout as well as a control-room signal.
View specifications
Magnetic Induction Level Controller
4 relay outputs
Reed-chain level transmitter with four configurable relay outputs, bright LED display and keypad-set alarm points. 0–3000 mm range, 4–20 mA or 1–5 V output, IP67. Replaces a transmitter plus separate alarm module.
View specifications
Submersible Level / Pressure Controller
5 relays, RS485
Five relay outputs plus RS485 Modbus and selectable analogue output, in the 100 mm round case. 0.5–300 m range, dual 24 V DC / 110–220 V AC-DC supply, high-brightness dual-row LED. For pump control with remote supervision.
View specifications