Pressure Transmitters & Controllers
Our pressure line splits into two jobs. For pure measurement, the PDD series covers differential pressure from ±100 Pa up to 40 MPa with 0.2 or 0.5 accuracy class, a 40:1 turndown and a two-wire 4–20 mA output. For measurement plus local control, the PCD and PCC controllers add a bright LED display, configurable alarm points set from the keypad, and four or five relay outputs that can trip pumps, valves or alarms directly — no separate PLC needed for a small skid. Both families share stainless-steel housings, IP65 protection and standard G1/2 or M20×1.5 process connections, with custom threads available.
What it measures
- Differential pressure
- Gauge pressure
- Absolute pressure
Available outputs
- 4–20 mA (2-wire)
- 1–5 V (3-wire)
- Relay ×4–5
- RS485
6 models in this family
Sorted by typical duty — workhorse models first

Differential Pressure Transmitter
0.2 class, 40:1 turndown
Differential pressure transmitter covering 0–0.2 kPa to 40 MPa with a 40:1 turndown and 0.2 accuracy class. Two-wire 4–20 mA, 750 Ω load, stainless housing, IP65. Built on a δ-cell capacitive sensor with a 0.10 mm measuring diaphragm.
View specifications
Differential Pressure Transmitter
Bidirectional, 2088 housing
Bidirectional differential pressure transmitter spanning −100 kPa to 200 kPa, in the standard 2088 housing with a liquid-crystal head. Two-wire 4–20 mA or three-wire 1–5 V, 0.2 accuracy class, stainless body, IP65.
View specifications
Differential Pressure Transmitter
Compact stainless body
Compact differential pressure transmitter, −100 kPa to 200 kPa, in a small stainless body for tight installation space. Two-wire 4–20 mA or three-wire 1–5 V, 0.2 accuracy class, G1/2 or M20×1.5, IP65.
View specifications
Pressure Transmitter Controller
4 relays
Pressure transmitter with a 24-bit A/D, LED display, four relay outputs and selectable analogue output. −0.1 to 60 MPa, 0.2 accuracy class, diffusion-silicon, ceramic piezoresistive or ceramic capacitive sensor, stainless and aluminium housing.
View specifications
Pressure Transmitter Controller
5 relays, 150 mm case
Five relay outputs in a Φ150 mm gauge case, with dual 24 V DC / 220 V AC supply so it replaces a mechanical gauge in situ. −0.1 to 60 MPa, 0.2 accuracy class, high-brightness LED display, selectable analogue output.
View specifications
Illustrative imagePressure Transmitter Controller
5 relays, Φ100 mm case
The 100 mm version of the pressure controller: five relays, −0.1 to 60 MPa, 0.2 accuracy class, LED display, selectable analogue output. Fits the cut-out a 100 mm mechanical gauge leaves behind.
View specificationsOther product families
- Flow Sensors & Switches4
- Level Sensors & Transmitters17
- Temperature Sensors & Transmitters10
- Ultrasonic Proximity Sensors7
- Laser Methane Detection3
- Linear Displacement Transducers5
- Analytical Instruments3
- Industrial IoT & Wireless Sensing5
- Motion, Photoelectric & Metering6
Looking across the whole catalogue instead? See all 66 models →
Need a model that is not in the catalogue?
Send us the medium, range, thread and output you need. Most custom configurations are quoted from the factory engineering desk rather than handed to a trading partner.