Pressure Transmitters & Controllers
PDD3051 Differential Pressure Transmitter
0.2 class, 40:1 turndown

PDD3051 technical data
Measurement
- Range
- 0–0.2 kPa to 40 MPa
- Turndown
- 40:1
- Accuracy class
- 0.2 or 0.5
- Non-linearity
- 0.2
- Hysteresis
- ≤ 0.01 % of span
- Long-term stability
- 0.15 % FS/year
- Overload capability
- 2–3× span
- Temperature effect
- 0.15 %/K
Electrical
- Supply voltage
- DC 24 V (14–36 V)
- Output
- Two-wire 4–20 mA
- Load impedance
- 750 Ω
- Insulation resistance
- ≥ 100 MΩ at 100 V DC
Mechanical
- Medium
- Liquid, gas or steam
- Housing material
- Stainless steel
- Ambient temperature
- −30 to +70 °C
- Medium temperature
- −40 to +100 °C
- Storage temperature
- −40 to +85 °C
- Ingress protection
- IP65
Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.
Request the PDF datasheet →Pressure Transmitters & Controllers
PDD3051Differential Pressure Transmitter
0.2 class, 40:1 turndown
Differential pressure transmitter covering 0–0.2 kPa to 40 MPa with a 40:1 turndown and 0.2 accuracy class. Two-wire 4–20 mA, 750 Ω load, stainless housing, IP65. Built on a δ-cell capacitive sensor with a 0.10 mm measuring diaphragm.
Engineering reply · Evaluation samples available · Custom ranges built to order
- 40:1 turndown — one spare covers many duties
- 0.2 accuracy class, hysteresis ≤ 0.01 % FS
- 0.15 % FS/year long-term stability
- Two-wire 4–20 mA, 750 Ω load
- Stainless housing, IP65
How it works
The PDD3051 uses a δ-cell: a tensioned measuring diaphragm between two capacitor plates, with the process pressure transmitted to it through fill fluid and isolating diaphragms on the high and low sides. Diaphragm displacement is at most 0.10 mm, and the change in capacitance is converted linearly to a two-wire 4–20 mA signal. The practical benefit of the 40:1 turndown is that one transmitter model covers a wide span, so a plant can standardise on a single spare instead of stocking a range for every application. Non-linearity is 0.2, hysteresis is under 0.01 % of span, and long-term stability is 0.15 % FS per year.
Typical applications
- Filter and strainer differential pressure
- Flow measurement across an orifice plate
- Tank level from hydrostatic head
- Pump differential head
- Steam and condensate service with the appropriate seals
Not certain PDD3051 is the right unit?
Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.
Same family
Other pressure instruments

Differential Pressure Transmitter
Bidirectional, 2088 housing
Bidirectional differential pressure transmitter spanning −100 kPa to 200 kPa, in the standard 2088 housing with a liquid-crystal head. Two-wire 4–20 mA or three-wire 1–5 V, 0.2 accuracy class, stainless body, IP65.
View specifications
Differential Pressure Transmitter
Compact stainless body
Compact differential pressure transmitter, −100 kPa to 200 kPa, in a small stainless body for tight installation space. Two-wire 4–20 mA or three-wire 1–5 V, 0.2 accuracy class, G1/2 or M20×1.5, IP65.
View specifications
Pressure Transmitter Controller
4 relays
Pressure transmitter with a 24-bit A/D, LED display, four relay outputs and selectable analogue output. −0.1 to 60 MPa, 0.2 accuracy class, diffusion-silicon, ceramic piezoresistive or ceramic capacitive sensor, stainless and aluminium housing.
View specifications
Pressure Transmitter Controller
5 relays, 150 mm case
Five relay outputs in a Φ150 mm gauge case, with dual 24 V DC / 220 V AC supply so it replaces a mechanical gauge in situ. −0.1 to 60 MPa, 0.2 accuracy class, high-brightness LED display, selectable analogue output.
View specifications