The full catalogue
Every instrument is assembled, calibrated and pressure-tested in our own facility in Jimei District, Xiamen. Filter by model code, measured quantity, wetted material or output signal — then send the process conditions for a price and a lead time.
66 of 66 models
All models
Illustrative imageHSM10FlowThermal Flow Switch
Single set-point
Thermal-dispersion flow switch with a single adjustable set-point, sealed all-in-one stainless body rated IP67 and 100 bar. Relay, PNP, NPN or 4–20 mA output, G1/2 thread as standard. No paddle and no moving part in the flow path, so scale and debris cannot jam it.
Illustrative imageHSM20FlowThermal Flow Switch
Dual set-point
Two independently adjustable set-points on one thermal flow switch, giving alarm and trip from a single instrument. Two potentiometers set the thresholds; red, yellow and green LEDs report which band the flow is in. IP68 sealed body, relay or PNP/NPN output, rated to 100 bar.
Illustrative imageHSM30FlowDigital Thermal Flow Switch
LED display
Thermal flow switch with a four-digit LED display showing live flow velocity, set by two front-panel keys rather than a screwdriver. Reverse-polarity, short-circuit and overload protected. Handles media up to 100 °C and pressures to 100 bar, sealed to IP67.
S400FlowMass Flow Controller
Closed loop, 100–200 L/min
Closed-loop gas flow controller combining a thermal flow sensor and a normally-closed solenoid valve in one body. Three ranges — 100, 150 and 200 L/min — with ±1 % FS accuracy, 2 s response and 5–100 % control range. Swagelok or VCR fittings, ±15 V DC supply.
HWS10LevelRod Float Level Switch
1–4 set-points
Discrete level switch with one to four magnetic reed points on a stainless guide rod. Passive dry contacts need no power supply, and the reed elements never touch the liquid. Rod diameter 9–25 mm, pressure to 6.3 MPa, temperature to 150 °C.
HWS20LevelRod Float Level Switch
Extended body
The HWS20 shares the HWS10's reed-on-rod principle with a longer, heavier-duty body for deeper tanks and wider mounting spans. Same passive dry-contact output, 1–4 set-points, 6.3 MPa and 150 °C ratings.
Illustrative imageHLS01LevelCable Float Level Switch
SPDT, 15 A
Injection-moulded float on a flexible rubber cable, switching 15 A at 250 V AC through an SPDT contact. Suits long cable runs, multiple points on one drop, submersible pumps and media carrying granular solids. IP68, specific gravity above 0.6.
HTS11LevelMagnetic Level Gauge
Top-mounted
Direct-reading magnetic flip gauge for top mounting, 200–6000 mm range, 10 MPa and up to 450 °C. Red-and-white flip column needs no power; a 4–20 mA transmitter and magnetic memory switches can be added for remote indication and alarms.
HTS22LevelMagnetic Level Gauge
Side-mounted
Side-mounted direct-reading magnetic flip gauge, 200–6000 mm, 10 MPa, up to 450 °C. Flange or threaded connection, optional 4–20 mA output and magnetic memory switches. Explosion-proof and corrosion-resistant construction for hazardous and high-pressure service.
HWT10LevelMagnetic Induction Level Transmitter
Continuous, 4–20 mA
Continuous level transmitter using a chain of magnetic reed modules inside a stainless guide tube. Range to 3000 mm, 4–20 mA two-wire output, 5 mm resolution, 750 Ω load. Explosion-proof aluminium housing, IP67, flange or threaded mounting.
HWT20LevelMagnetic Induction Level Transmitter
Local LCD display
Reed-chain level transmitter with a local LCD head showing the level on the vessel. 0–3000 mm, 4–20 mA or 1–5 V output, 5 mm resolution, explosion-proof housing, IP67. Suits tanks where operators need a local readout as well as a control-room signal.
HWT2088LevelMagnetic Induction Level Controller
4 relay outputs
Reed-chain level transmitter with four configurable relay outputs, bright LED display and keypad-set alarm points. 0–3000 mm range, 4–20 mA or 1–5 V output, IP67. Replaces a transmitter plus separate alarm module.
HWT100LevelMagnetic Induction Level Controller
5 relays, dual supply
Five relay outputs plus 4–20 mA or 1–5 V, keypad-configured, with dual 24 V DC / 220 V AC supply so it can be wired straight into an existing panel. LED display, IP67, range to 3000 mm.
HMS10LevelMagnetostrictive Level Transmitter
High accuracy
Non-contact magnetostrictive level transmitter, 50–5000 mm, with 0.005 % FS non-linearity and 0.002 % FS repeatability — an order of magnitude better than reed-chain instruments. 4–20 mA, 0–10 V or RS485 output, explosion-proof, IP67.
Illustrative imageHPS10LevelSubmersible Level Transmitter
Hydrostatic, IP68
Hydrostatic level transmitter for wells, reservoirs and sumps. Range 0.05–300 m, 4–20 mA two-wire, 0.1 or 0.2 accuracy class, ceramic-capacitive or piezoresistive sensor. Ventilated cable prevents condensation, IP68.
Illustrative imageHPS20LevelSubmersible Level Transmitter
Local display
The HPS10 hydrostatic transmitter with a local display head, so the level can be read at the well head. 0.05–300 m, 4–20 mA, accuracy class 0.1 or 0.2, IP68 probe, condensation-resistant vent.
HPS2088LevelSubmersible Level Controller
4 relays
Submersible hydrostatic transmitter with a 24-bit A/D front end, LED display, four relay outputs and 4–20 mA / 0–10 V / 1–5 V analogue output. Range 0.5–300 m, alarm points set from the keypad, stainless and aluminium housing.
HPS100LevelSubmersible Level / Pressure Controller
5 relays, RS485
Five relay outputs plus RS485 Modbus and selectable analogue output, in the 100 mm round case. 0.5–300 m range, dual 24 V DC / 110–220 V AC-DC supply, high-brightness dual-row LED. For pump control with remote supervision.
HCT100LevelCapacitive Level Controller
5 relays, RS485
Coaxial capacitive level transmitter and controller, 100–5000 mm, with 24-bit A/D, five relays, RS485 Modbus and selectable analogue output. Handles viscous and coating media where float instruments would seize. 316 stainless probe.
HCT40LevelCapacitive Level Controller
2 relays
Coaxial capacitive level controller with two relay outputs, LED display and 24-bit A/D. 100–5000 mm, 4–20 mA / 0–10 V / 1–5 V selectable, stainless probe. The compact option for simple high/low control on viscous media.
HSM-VB106 / VB107LevelMicrowave Level Switch
Non-contact through-wall
Microwave resonance switch that detects level through the vessel wall, so nothing protrudes into the process. Works on solids and liquids with dielectric constant above 1.5, ignores foam, and tolerates sticky conductive build-up. PEEK and stainless wetted parts, 115 °C standard or 150 °C with heat sink.
PDD3051PressureDifferential Pressure Transmitter
0.2 class, 40:1 turndown
Differential pressure transmitter covering 0–0.2 kPa to 40 MPa with a 40:1 turndown and 0.2 accuracy class. Two-wire 4–20 mA, 750 Ω load, stainless housing, IP65. Built on a δ-cell capacitive sensor with a 0.10 mm measuring diaphragm.
PDD2088PressureDifferential Pressure Transmitter
Bidirectional, 2088 housing
Bidirectional differential pressure transmitter spanning −100 kPa to 200 kPa, in the standard 2088 housing with a liquid-crystal head. Two-wire 4–20 mA or three-wire 1–5 V, 0.2 accuracy class, stainless body, IP65.
PDD1020PressureDifferential Pressure Transmitter
Compact stainless body
Compact differential pressure transmitter, −100 kPa to 200 kPa, in a small stainless body for tight installation space. Two-wire 4–20 mA or three-wire 1–5 V, 0.2 accuracy class, G1/2 or M20×1.5, IP65.
PCD2088PressurePressure Transmitter Controller
4 relays
Pressure transmitter with a 24-bit A/D, LED display, four relay outputs and selectable analogue output. −0.1 to 60 MPa, 0.2 accuracy class, diffusion-silicon, ceramic piezoresistive or ceramic capacitive sensor, stainless and aluminium housing.
PCC216PressurePressure Transmitter Controller
5 relays, 150 mm case
Five relay outputs in a Φ150 mm gauge case, with dual 24 V DC / 220 V AC supply so it replaces a mechanical gauge in situ. −0.1 to 60 MPa, 0.2 accuracy class, high-brightness LED display, selectable analogue output.
Illustrative imagePCC100PressurePressure Transmitter Controller
5 relays, Φ100 mm case
The 100 mm version of the pressure controller: five relays, −0.1 to 60 MPa, 0.2 accuracy class, LED display, selectable analogue output. Fits the cut-out a 100 mm mechanical gauge leaves behind.
Illustrative imageTPS10TemperatureRTD Temperature Probe
Pt100 / Pt1000
Bare Pt100 or Pt1000 probe in a stainless sheath with a standard terminal head. −200 to +600 °C, resistance signal straight out, probe length and diameter made to order. The element to specify when the transmitter lives in the panel, not on the pipe.
TPT10TemperatureIntegrated Temperature Transmitter
4–20 mA, 2-wire
Pt100 probe with an integrated transmitter in the head, giving a two-wire 4–20 mA signal directly from the sensor. −200 to +600 °C, 0.1 or 0.2 accuracy class, epoxy-potted and intrinsically safe module, IP65.
TPT20TemperatureTemperature Transmitter
Local display
Integrated temperature transmitter with a local display in the head, so the temperature is readable at the measurement point. −200 to +600 °C, two-wire 4–20 mA, 0.1 or 0.2 accuracy class, epoxy-potted, IP65.
TPT201TemperatureSmart Temperature Transmitter
MCU, 2 alarm outputs
Microcontroller-based temperature transmitter with a wide −200 to +600 °C span, 0.1 or 0.2 accuracy class, local display and two opto-isolated alarm outputs. 4–20 mA or 1–5 V, 750 Ω load, IP65.
TPT2088TemperatureTemperature Transmitter Controller
4 relays, 2088 housing
Temperature transmitter and controller in the standard 2088 housing: 24-bit A/D, bright LED display, four relays and 4–20 mA / 1–5 V output. −200 to +600 °C, 0.1 or 0.2 accuracy class, IP65.
TPT100TemperatureTemperature Transmitter Controller
5 relays, RS485
Five relay outputs plus RS485 Modbus on a Pt100/Pt1000 temperature transmitter. −200 to +600 °C, 24-bit A/D, LED display, parallel analogue output, IP65. For temperature control with supervisory reporting.
TPT00TemperatureTemperature Transmitter Module
Head-mount or DIN-rail
Bare transmitter module for mounting inside a connection head or on a DIN rail. Converts a Pt100/Pt1000 resistance to 4–20 mA, 0–5 V, 1–5 V or 0–10 V. 12–36 V supply, 0.1/0.2/0.5 accuracy class, epoxy-potted.
HSM-FOTemperatureFluorescent Fibre-Optic Temperature Sensor
Dielectric, HV-rated
Fluorescent-decay temperature sensing on a quartz fibre, with no electrical path to the measurement point. −40 to +200 °C (to 300 °C on request), ±1 °C, 0.1 °C resolution, USART output, immune to electromagnetic fields and rated for 100 kV at the lead.
HSM-FOPTemperatureFluorescent Fibre-Optic Probe
ST connector
Replacement or additional fibre probe for the fluorescent system: ST connector, quartz fibre with PTFE jacket, rare-earth sensing tip, 3 mm overall diameter, rated to 200 °C. Bend radius 13.2 cm long-term, 4.4 cm short-term.
HSM-FOSTemperatureFluorescent Fibre-Optic Temperature System
Multi-channel, 1–32
Complete multi-channel fibre-optic temperature system: 1–32 channels, −40 to +200 °C (300 °C on request), ±1 °C, ±0.1 °C resolution, RS485 Modbus RTU, 100–300 V AC supply, 2.3 mm probes rated for 100 kV.
UB120-12GM55UltrasonicUltrasonic Proximity Sensor
20–120 mm, M12
M12 ultrasonic sensor with a 20–120 mm sensing range, 20 mm dead zone and 0.1 mm resolution. Detects clear glass, polished metal and liquid that optical sensors miss. PNP/NPN switching output, teach-in, IP67, 16 g.
UB200-12GM65UltrasonicUltrasonic Distance Sensor
20–120 mm, analogue
The analogue-output member of the M12 family: 4–20 mA, 0–10 V, RS485 Modbus and IO-Link on one sensor, with a 20–120 mm range. Use it where you need the distance value, not just a switch.
Illustrative imageUB300-18GM45UltrasonicUltrasonic Proximity Sensor
30–300 mm, M18
M18 ultrasonic sensor, 30–300 mm range, 30 mm dead zone, 0.1 mm resolution, 22 ms response. PNP/NPN switching output with teach-in, IP67, 35 g. The general-purpose size for medium detection distances.
UB500-18GM45UltrasonicUltrasonic Proximity Sensor
50–500 mm, M18
M18 ultrasonic sensor with a 50–500 mm range and 50 mm dead zone. 0.15 mm resolution, 32 ms response, PNP/NPN output, teach-in, IP67. For longer approaches through fixtures and guards.
UB1000-18GM55UltrasonicUltrasonic Proximity Sensor
60–1000 mm, M18
Metre-range M18 ultrasonic sensor: 60–1000 mm, 60 mm dead zone, 0.17 mm resolution, 52 ms response. PNP/NPN switching, teach-in, IP67, 38 g.
UB2000-30GM60UltrasonicUltrasonic Proximity Sensor
100–2000 mm, M30
Two-metre range in an M30 barrel with a 100 mm dead zone. 0.17 mm resolution, 82 ms response, PNP/NPN output, teach-in, IP67, 105 g. For warehouse and vehicle-scale distances.
UB4000-30GM60UltrasonicUltrasonic Proximity Sensor
200–4000 mm, M30
Four-metre ultrasonic range in an M30 barrel: 200–4000 mm, 200 mm dead zone, 0.17–1.5 mm resolution, 162 ms response, PNP/NPN switching. For silos, large vessels and AGV obstacle detection.
Illustrative imageHSM300GasWearable Laser Methane Detector
Helmet-mounted, 60 m
Helmet-mounted TDLAS methane detector with a 60 m detection distance and 0.06 s response, so a walking inspector sweeps an area without stopping. 0–100 000 ppm·m range, 6.5 h battery, IP68, Exib IIC T4 Gb, 260 g.
HSM1000GasLong-Range Laser Methane Detector
Handheld, 100 m
Handheld TDLAS methane detector with a 100 m detection distance and 0.1 s response. 0–100 000 ppm·m, 10 h battery, IP68, Exib IIC T4, 1.2 kg. For inspecting structures that cannot be approached on foot.
HSM-PTZ-MGasExplosion-Proof PTZ Methane Camera
Fixed installation
Fixed explosion-proof pan-tilt head combining a TDLAS methane detector with a 40× optical zoom camera. 400–55 000 ppm·m, 100 m range, 360° continuous pan, 255 presets, 200 m IR, Exd IIC T6 Gb, IP68.
MPS10DisplacementRod-Type Linear Transducer
0.05 % linearity
Rod-type linear position transducer for direct coupling to a moving member. Strokes 50–1250 mm, 0.05 % linearity, 0.01 mm resolution, 100-million-cycle life, 4–20 mA or 0–10 V output, IP65.
MDS10DisplacementDraw-Wire Displacement Transducer
50–20 000 mm
Draw-wire position transducer measuring up to 20 m from a compact housing where a rod will not fit. 0.05 % FS repeatability, 0.25 % FS linearity, 4–20 mA or 0–10 V, stainless 316L cable, IP65.
MMS10DisplacementMagnetostrictive Displacement Transducer
Non-contact, 0.002 % FS
Non-contact magnetostrictive position transducer with 0.005 % FS non-linearity and 0.002 % FS repeatability. Strokes 50–5000 mm, 4–20 mA, 0–10 V or RS485, explosion-proof, IP67. No wiper to wear out.
ERDisplacementLinear Displacement Sensor
50–1000 mm, 1 ms update
Linear displacement sensor with 50–1000 mm travel, 1 ms update time on four-wire connection, 0.05 % FS non-linearity and ±0.1 mm resolution. 4–20 mA or 0–10 V, aluminium housing, 304L rod, M12 five-pin connector.
ESCDisplacementMagnetostrictive Displacement Sensor
25–2500 mm, 16-bit
Non-contact magnetostrictive position sensor, 25–2500 mm stroke, 16-bit D/A giving ±0.01 mm resolution on the voltage output. 1 ms update to 1 m stroke, 0.05 % FS non-linearity, IP67, −40 to +75 °C.
HSM-DOG200AnalyticalDissolved Oxygen Meter
Panel-mount, 96 × 96
Panel-mount dissolved oxygen transmitter reading 0–19.99 mg/L or 0–199.9 %, with automatic temperature compensation, isolated 4–20 mA output and dual relay control. 96 × 96 mm DIN case, 230 V AC supply.
DOG-208FAAnalyticalDissolved Oxygen Electrode
Steam-sterilisable, 130 °C
Polarographic dissolved oxygen electrode that withstands 130 °C steam sterilisation, with a self-pressure-balancing design and an imported BJC membrane. 0.01–20 ppm range, 10 s response, 12 mm insertion diameter in 120, 280 or 450 mm lengths.
PHG-2091ProAnalyticalpH / ORP Controller
Two analogue outputs, RS485
pH and ORP controller accepting a range of analogue electrodes through a built-in A/D stage. −2 to 16 pH, −2000 to 2000 mV, ±1 % FS, two 4–20 mA outputs, five relays, Modbus RTU, ABS housing, IP65.
HSM-WPIndustrial IoTWireless Pressure Sensor
4G / LoRa / NB-IoT
Battery-powered pressure sensor for unmanned pipeline and network monitoring. Wired, battery or cyclic supply; RS485 Modbus, I²C or 0.25–2.5 V output locally; 4G, LoRa or NB-IoT to the cloud. CE (EMC) compliant with digital temperature compensation.
HSM-WTIndustrial IoTWireless Temperature Sensor
4G / LoRa / NB-IoT
Battery-powered temperature sensor for remote networks, using a Pt100/Pt1000 element in a 304 or 316 stainless probe. Wired, battery or cyclic supply; RS485 Modbus or analogue locally; 4G, LoRa or NB-IoT uplink.
HSM-WLIndustrial IoTWireless Level Sensor
Submersible or capacitive
Battery-powered level sensor for reservoirs, tanks and networks. Hydrostatic submersible or capacitive sensing, RS485 Modbus or analogue locally, 4G / LoRa / NB-IoT uplink. For sites with no power and no cable route.
HSM-WGIndustrial IoTWireless Gas Sensor
Toxic and combustible
Wireless gas sensor for toxic and combustible gas monitoring in plants and buildings, with wired or battery supply and a choice of wireless uplink. Used for confined-space safety, combustion monitoring, food and beverage process control and medical diagnostics.
HSM-EGIndustrial IoTIndustrial Edge Gateway
4G / Wi-Fi / broadband
Edge gateway with 4G, Wi-Fi and broadband uplinks, protocol parsing and edge computing. Local configuration software reports CPU/RAM/ROM, firmware, network state; NAT and port mapping, TLS transport encryption, hardware and software watchdog.
SBG10Motion & MeteringAir Damper Control System
Manual / automatic
Integrated pneumatic control block for air dampers: two imported hand valves plus a vertical solenoid valve on one manifold, with automatic and manual modes that interlock so only one is active. 0.2–1.0 MPa air, DC 24/110/220 V or AC 110 V.
HSM41Motion & MeteringLaser Displacement Sensor
50–400 mm, 4-digit
Laser displacement sensor with a 655 nm spot measuring a 50–400 mm centre distance, plus a 940 nm infrared TOF variant reaching 2.5 m or 4 m. Metal housing, LED display and keypad setup, four-digit readout. For dispensing, packaging, automotive and AGV duty.
HSM-ENCMotion & MeteringIncremental Encoder
2048 PPR, hollow shaft
Photoelectric incremental encoder with a Φ76 mm body, hollow shaft in Φ12, Φ20 or Φ25 mm, up to 2048 PPR. Supply 5 V DC, 5–30 V DC or 9–26 V DC, IP54 or IP65.
- HS101-13Motion & Metering
Tension / Compression Load Cell
5–100 kN
Strain-gauge load cell for 5–100 kN tension or compression, 0.1 % FS accuracy, 1.2–2.0 mV/V output, 150 % safe overload and 200 % ultimate. Stainless construction, IP65, 5–10 V DC excitation.
- HS-201-04Motion & Metering
Compression Load Cell
100–5000 kg
Stainless compression load cell for 100–5000 kg, 0.5 % FS accuracy, 1.0–2.0 mV/V output, 150 % safe and 200 % ultimate overload. IP65, 5–10 V DC excitation, Φ4 or Φ5 mm cable.
HSM-BDL50Motion & MeteringMultifunction Power Meter
DIN rail, RS485
DIN-rail three-phase power meter with a dedicated metering chip, 0.55 accuracy class for active energy, full-parameter monitoring and RS485 for remote reading. LED pulse outputs to DIN 43864, LCD display, 35 mm rail mounting.
How to choose
Three questions decide most specifications
If you can answer these, the model list narrows to two or three candidates — and we will confirm which one we would ship for the duty.
- 01
What are you measuring?
Point level or continuous, differential or gauge pressure, flow presence or flow rate. The quantity picks the family.
- 02
What conditions?
Medium, temperature, pressure and whether the area is classified. These set the wetted material and the housing.
- 03
What does the panel accept?
Relay, 4–20 mA, 0–10 V or RS485. If there is no PLC, the controller models switch the load themselves.
Need a model that is not in the catalogue?
Send us the medium, range, thread and output you need. Most custom configurations are quoted from the factory engineering desk rather than handed to a trading partner.