Temperature Sensors & Transmitters
HSM-FOP Fluorescent Fibre-Optic Probe
ST connector

HSM-FOP technical data
Optical
- Connector
- ST
- Fibre
- Quartz core, cladding, PTFE outer jacket
- Sensing tip
- Rare-earth fluorescent material
- Overall diameter
- 3 mm
- Long-term bend radius
- 13.2 cm
- Short-term bend radius
- 4.4 cm
- Maximum fibre temperature
- 200 °C
- Withstand voltage
- 100 kV AC at 50 Hz for 5 min, 0.4 m lead to earth
Environment
- Ambient temperature
- −20 to +55 °C
- Ambient humidity
- ≤ 95 % at 25 °C
Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.
Request the PDF datasheet →Temperature Sensors & Transmitters
HSM-FOPFluorescent Fibre-Optic Probe
ST connector
Replacement or additional fibre probe for the fluorescent system: ST connector, quartz fibre with PTFE jacket, rare-earth sensing tip, 3 mm overall diameter, rated to 200 °C. Bend radius 13.2 cm long-term, 4.4 cm short-term.
Engineering reply · Evaluation samples available · Custom ranges built to order
- Quartz fibre with PTFE jacket — chemically resistant
- Rare-earth sensing tip, no electrical path
- ST connector, standard fit
- 3 mm overall diameter
- 200 °C rating, 100 kV withstand
How it works
The probe is the consumable part of a fibre-optic temperature system. It carries light from the module to the sensing tip and back, and it is the part exposed to the process. The quartz core is clad and then sheathed in PTFE, so the fibre survives chemicals that would attack a plastic-jacketed cable, and the ST connector is a standard fit for the transmitter module. Probes are supplied in standard 5 m lengths and can be ordered shorter or longer.
Typical applications
- Replacement probes for existing fibre-optic systems
- Adding channels to a multi-channel module
- Retrofit of HV equipment already fitted with fibre ports
Not certain HSM-FOP is the right unit?
Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.
Same family
Other temperature instruments

Fluorescent Fibre-Optic Temperature Sensor
Dielectric, HV-rated
Fluorescent-decay temperature sensing on a quartz fibre, with no electrical path to the measurement point. −40 to +200 °C (to 300 °C on request), ±1 °C, 0.1 °C resolution, USART output, immune to electromagnetic fields and rated for 100 kV at the lead.
View specifications
Fluorescent Fibre-Optic Temperature System
Multi-channel, 1–32
Complete multi-channel fibre-optic temperature system: 1–32 channels, −40 to +200 °C (300 °C on request), ±1 °C, ±0.1 °C resolution, RS485 Modbus RTU, 100–300 V AC supply, 2.3 mm probes rated for 100 kV.
View specifications
Illustrative imageRTD Temperature Probe
Pt100 / Pt1000
Bare Pt100 or Pt1000 probe in a stainless sheath with a standard terminal head. −200 to +600 °C, resistance signal straight out, probe length and diameter made to order. The element to specify when the transmitter lives in the panel, not on the pipe.
View specifications
Integrated Temperature Transmitter
4–20 mA, 2-wire
Pt100 probe with an integrated transmitter in the head, giving a two-wire 4–20 mA signal directly from the sensor. −200 to +600 °C, 0.1 or 0.2 accuracy class, epoxy-potted and intrinsically safe module, IP65.
View specifications