Factory-direct manufacturer · Xiamen, China · Exporting worldwide

Temperature Sensors & Transmitters

The TPS and TPT families are built around Pt100 and Pt1000 platinum elements in stainless-steel probes, covering −200 to +600 °C. You can take the bare resistance signal, or add an integrated transmitter for a two-wire 4–20 mA output; the TPT201 and TPT2088 add local display and up to five relay outputs, and the TPT100 adds RS485 Modbus. Probe length, diameter and thread are made to order. For switchgear, transformers and other locations where a metal probe would be a liability, the fluorescent fibre-optic system measures temperature on a purely dielectric path and withstands 100 kV at the fibre lead.

What it measures

  • Process temperature
  • Surface temperature
  • HV hotspot temperature

Available outputs

  • Pt100 / Pt1000 resistance
  • 4–20 mA
  • 1–5 V
  • Relay
  • RS485
  • USART

10 models in this family

Sorted by typical duty — workhorse models first

TPS10 RTD Temperature ProbeIllustrative image
TPS10Temperature

RTD Temperature Probe

Pt100 / Pt1000

Bare Pt100 or Pt1000 probe in a stainless sheath with a standard terminal head. −200 to +600 °C, resistance signal straight out, probe length and diameter made to order. The element to specify when the transmitter lives in the panel, not on the pipe.

View specifications
TPT10 Integrated Temperature Transmitter
TPT10Temperature

Integrated Temperature Transmitter

4–20 mA, 2-wire

Pt100 probe with an integrated transmitter in the head, giving a two-wire 4–20 mA signal directly from the sensor. −200 to +600 °C, 0.1 or 0.2 accuracy class, epoxy-potted and intrinsically safe module, IP65.

View specifications
TPT20 Temperature Transmitter
TPT20Temperature

Temperature Transmitter

Local display

Integrated temperature transmitter with a local display in the head, so the temperature is readable at the measurement point. −200 to +600 °C, two-wire 4–20 mA, 0.1 or 0.2 accuracy class, epoxy-potted, IP65.

View specifications
TPT201 Smart Temperature Transmitter
TPT201Temperature

Smart Temperature Transmitter

MCU, 2 alarm outputs

Microcontroller-based temperature transmitter with a wide −200 to +600 °C span, 0.1 or 0.2 accuracy class, local display and two opto-isolated alarm outputs. 4–20 mA or 1–5 V, 750 Ω load, IP65.

View specifications
TPT2088 Temperature Transmitter Controller
TPT2088Temperature

Temperature Transmitter Controller

4 relays, 2088 housing

Temperature transmitter and controller in the standard 2088 housing: 24-bit A/D, bright LED display, four relays and 4–20 mA / 1–5 V output. −200 to +600 °C, 0.1 or 0.2 accuracy class, IP65.

View specifications
TPT100 Temperature Transmitter Controller
TPT100Temperature

Temperature Transmitter Controller

5 relays, RS485

Five relay outputs plus RS485 Modbus on a Pt100/Pt1000 temperature transmitter. −200 to +600 °C, 24-bit A/D, LED display, parallel analogue output, IP65. For temperature control with supervisory reporting.

View specifications
TPT00 Temperature Transmitter Module
TPT00Temperature

Temperature Transmitter Module

Head-mount or DIN-rail

Bare transmitter module for mounting inside a connection head or on a DIN rail. Converts a Pt100/Pt1000 resistance to 4–20 mA, 0–5 V, 1–5 V or 0–10 V. 12–36 V supply, 0.1/0.2/0.5 accuracy class, epoxy-potted.

View specifications
HSM-FO Fluorescent Fibre-Optic Temperature Sensor
HSM-FOTemperature

Fluorescent Fibre-Optic Temperature Sensor

Dielectric, HV-rated

Fluorescent-decay temperature sensing on a quartz fibre, with no electrical path to the measurement point. −40 to +200 °C (to 300 °C on request), ±1 °C, 0.1 °C resolution, USART output, immune to electromagnetic fields and rated for 100 kV at the lead.

View specifications
HSM-FOP Fluorescent Fibre-Optic Probe
HSM-FOPTemperature

Fluorescent Fibre-Optic Probe

ST connector

Replacement or additional fibre probe for the fluorescent system: ST connector, quartz fibre with PTFE jacket, rare-earth sensing tip, 3 mm overall diameter, rated to 200 °C. Bend radius 13.2 cm long-term, 4.4 cm short-term.

View specifications
HSM-FOS Fluorescent Fibre-Optic Temperature System
HSM-FOSTemperature

Fluorescent Fibre-Optic Temperature System

Multi-channel, 1–32

Complete multi-channel fibre-optic temperature system: 1–32 channels, −40 to +200 °C (300 °C on request), ±1 °C, ±0.1 °C resolution, RS485 Modbus RTU, 100–300 V AC supply, 2.3 mm probes rated for 100 kV.

View specifications

Need a model that is not in the catalogue?

Send us the medium, range, thread and output you need. Most custom configurations are quoted from the factory engineering desk rather than handed to a trading partner.