Motion, Photoelectric & Metering
HS-201-04 Compression Load Cell
100–5000 kg
HS-201-04 technical data
Measurement
- Range
- 100–5000 kg
- Accuracy class
- 0.5 % FS
- Rated output
- 1.0–2.0 mV/V
- Zero output
- ±0.05 mV/V
- Non-linearity
- ±0.5 % FS
- Hysteresis
- ±0.5 % FS
- Repeatability
- ±0.5 % FS
- Creep (30 min)
- ±0.5 % FS
- Temperature effect on sensitivity
- ±0.5 % FS per 10 °C
- Temperature effect on zero
- ±0.5 % FS per 10 °C
- Safe overload
- 150 % FS
- Ultimate overload
- 200 % FS
Electrical
- Input resistance
- 750 ± 20 Ω
- Output resistance
- 700 ± 10 Ω
- Insulation resistance
- ≥ 5000 MΩ at 50 V DC
- Recommended excitation
- 5–10 V DC
- Maximum excitation
- 15 V DC
Mechanical
- Material
- Stainless steel
- Temperature compensation range
- −10 to +40 °C
- Operating temperature range
- −20 to +60 °C
- Cable
- Φ4.0 or Φ5.0 × 3000 mm
- Ingress protection
- IP65
Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.
Request the PDF datasheet →Motion, Photoelectric & Metering
HS-201-04Compression Load Cell
100–5000 kg
Stainless compression load cell for 100–5000 kg, 0.5 % FS accuracy, 1.0–2.0 mV/V output, 150 % safe and 200 % ultimate overload. IP65, 5–10 V DC excitation, Φ4 or Φ5 mm cable.
Engineering reply · Evaluation samples available · Custom ranges built to order
- 100–5000 kg capacity
- 0.5 % FS accuracy class
- Stainless steel body
- 150 % safe overload
- IP65 sealed
How it works
A weighing cell rather than a force-measurement cell: 100 kg to 5 tonnes, 0.5 % FS, stainless body, sealed to IP65. The 0.5 % class is the appropriate grade for tank weighing, hopper content and platform scales, where the accuracy requirement is content estimation rather than force calibration. Both sensitivity and zero are compensated across −10 to +40 °C.
Ordering notes
- Images for this model are pending — request the current datasheet for dimensional drawings.
Typical applications
- Tank and silo weighing
- Hopper content measurement
- Platform and floor scales
- Batching systems
Not certain HS-201-04 is the right unit?
Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.
Same family
Other motion & metering instruments

Air Damper Control System
Manual / automatic
Integrated pneumatic control block for air dampers: two imported hand valves plus a vertical solenoid valve on one manifold, with automatic and manual modes that interlock so only one is active. 0.2–1.0 MPa air, DC 24/110/220 V or AC 110 V.
View specifications
Laser Displacement Sensor
50–400 mm, 4-digit
Laser displacement sensor with a 655 nm spot measuring a 50–400 mm centre distance, plus a 940 nm infrared TOF variant reaching 2.5 m or 4 m. Metal housing, LED display and keypad setup, four-digit readout. For dispensing, packaging, automotive and AGV duty.
View specifications
Incremental Encoder
2048 PPR, hollow shaft
Photoelectric incremental encoder with a Φ76 mm body, hollow shaft in Φ12, Φ20 or Φ25 mm, up to 2048 PPR. Supply 5 V DC, 5–30 V DC or 9–26 V DC, IP54 or IP65.
View specificationsTension / Compression Load Cell
5–100 kN
Strain-gauge load cell for 5–100 kN tension or compression, 0.1 % FS accuracy, 1.2–2.0 mV/V output, 150 % safe overload and 200 % ultimate. Stainless construction, IP65, 5–10 V DC excitation.
View specifications