Motion, Photoelectric & Metering
HSM-ENC Incremental Encoder
2048 PPR, hollow shaft

HSM-ENC technical data
Measurement
- Sensing principle
- Photoelectric
- Maximum resolution
- 2048 PPR
Electrical
- Supply voltage
- 5 V DC; 5–30 V DC; 9–26 V DC
Mechanical
- Body diameter
- Φ76 mm
- Shaft
- Hollow, Φ12 / Φ20 / Φ25 mm
- Ingress protection
- IP54 / IP65
Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.
Request the PDF datasheet →Motion, Photoelectric & Metering
HSM-ENCIncremental Encoder
2048 PPR, hollow shaft
Photoelectric incremental encoder with a Φ76 mm body, hollow shaft in Φ12, Φ20 or Φ25 mm, up to 2048 PPR. Supply 5 V DC, 5–30 V DC or 9–26 V DC, IP54 or IP65.
Engineering reply · Evaluation samples available · Custom ranges built to order
- Up to 2048 PPR
- Hollow shaft Φ12, Φ20 or Φ25 mm
- Three supply options: 5 V, 5–30 V, 9–26 V DC
- Photoelectric sensing
- IP54 or IP65
How it works
An incremental encoder turns shaft rotation into a pulse train, and the control system counts pulses to derive speed and position. The photoelectric sensing principle gives clean edges at high resolution; 2048 pulses per revolution on a Φ76 mm body suits most general machine-feedback duties. The hollow-shaft mounting slides directly over the machine shaft, which avoids the coupling alignment problems that shorten the life of a solid-shaft encoder.
Typical applications
- Motor speed feedback
- Conveyor speed and length measurement
- Machine axis position
- Winding and unwinding tension control
Not certain HSM-ENC is the right unit?
Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.
Same family
Other motion & metering instruments

Laser Displacement Sensor
50–400 mm, 4-digit
Laser displacement sensor with a 655 nm spot measuring a 50–400 mm centre distance, plus a 940 nm infrared TOF variant reaching 2.5 m or 4 m. Metal housing, LED display and keypad setup, four-digit readout. For dispensing, packaging, automotive and AGV duty.
View specifications
Multifunction Power Meter
DIN rail, RS485
DIN-rail three-phase power meter with a dedicated metering chip, 0.55 accuracy class for active energy, full-parameter monitoring and RS485 for remote reading. LED pulse outputs to DIN 43864, LCD display, 35 mm rail mounting.
View specifications
Air Damper Control System
Manual / automatic
Integrated pneumatic control block for air dampers: two imported hand valves plus a vertical solenoid valve on one manifold, with automatic and manual modes that interlock so only one is active. 0.2–1.0 MPa air, DC 24/110/220 V or AC 110 V.
View specificationsTension / Compression Load Cell
5–100 kN
Strain-gauge load cell for 5–100 kN tension or compression, 0.1 % FS accuracy, 1.2–2.0 mV/V output, 150 % safe overload and 200 % ultimate. Stainless construction, IP65, 5–10 V DC excitation.
View specifications