Level Sensors & Transmitters
HLS01 Cable Float Level Switch
SPDT, 15 A

HLS01 technical data
Electrical
- Contact rating
- 15 A at 250 V AC
- Contact form
- SPDT
Mechanical
- Material
- Polypropylene, SUS 304
- Rated pressure
- 0–0.5 MPa
- Cable
- Rubber-sheathed
- Medium temperature
- −10 to +80 °C
- Minimum specific gravity
- > 0.6 g/cm³
- Ingress protection
- IP68
Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.
Request the PDF datasheet →Level Sensors & Transmitters
HLS01Cable Float Level Switch
SPDT, 15 A
Injection-moulded float on a flexible rubber cable, switching 15 A at 250 V AC through an SPDT contact. Suits long cable runs, multiple points on one drop, submersible pumps and media carrying granular solids. IP68, specific gravity above 0.6.
Engineering reply · Evaluation samples available · Custom ranges built to order
- Switches 15 A / 250 V AC directly — no contactor needed
- Suitable for granular and lumpy media
- Multiple floats on one cable for multi-point control
- Rubber cable resists acid and alkali
- IP68 sealed, submersible
How it works
The HLS01 hangs a sealed float from a rubber cable. As the liquid rises the float tilts, a steel ball inside rolls and operates a microswitch, and the SPDT contact changes state. The 15 A rating is high enough to switch a pump directly, without a contactor, which is unusual for a float of this size. Because the float is small and the cable flexible, several can be hung at different depths on one drop to give multi-point control. It tolerates granular and lumpy media that would jam a guided float, and the cord grip and moulding are rated IP68.
Typical applications
- Submersible pump control in dirty sumps
- Sewage and wastewater wet wells
- Water towers and cisterns
- Long-distance or multi-point level control
Not certain HLS01 is the right unit?
Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.
Same family
Other level instruments

Rod Float Level Switch
1–4 set-points
Discrete level switch with one to four magnetic reed points on a stainless guide rod. Passive dry contacts need no power supply, and the reed elements never touch the liquid. Rod diameter 9–25 mm, pressure to 6.3 MPa, temperature to 150 °C.
View specifications
Rod Float Level Switch
Extended body
The HWS20 shares the HWS10's reed-on-rod principle with a longer, heavier-duty body for deeper tanks and wider mounting spans. Same passive dry-contact output, 1–4 set-points, 6.3 MPa and 150 °C ratings.
View specifications
Magnetic Level Gauge
Top-mounted
Direct-reading magnetic flip gauge for top mounting, 200–6000 mm range, 10 MPa and up to 450 °C. Red-and-white flip column needs no power; a 4–20 mA transmitter and magnetic memory switches can be added for remote indication and alarms.
View specifications
Magnetic Level Gauge
Side-mounted
Side-mounted direct-reading magnetic flip gauge, 200–6000 mm, 10 MPa, up to 450 °C. Flange or threaded connection, optional 4–20 mA output and magnetic memory switches. Explosion-proof and corrosion-resistant construction for hazardous and high-pressure service.
View specifications