Factory-direct manufacturer · Xiamen, China · Exporting worldwide

Level Sensors & Transmitters

HPS100 Submersible Level / Pressure Controller

5 relays, RS485

Request a quote

HPS100 technical data

Measurement

Measuring range
0.5–300 m
Sensor type
Piezoresistive, ceramic piezoresistive or ceramic capacitive
Accuracy class
0.2 or 0.5
Overload pressure
1.5× full-scale
Sampling rate
4 readings per second
Display range
−1999 to 9999
Long-term stability
0.5 % FS/year
Power supply effect
≤ 0.1 % FS

Electrical

Supply voltage
DC 24 V, AC-DC 110 V, AC-DC 220 V
Power consumption
≤ 5 W
Analogue output
4–20 mA / 0–10 or 20 mA / 0–5 or 1–5 V DC
Relay outputs
5 pairs
Relay rating
3 A at 250 V AC, 3 A at 30 V DC
Relay life
> 100 000 operations
Communications
RS485
A/D conversion
24-bit

Mechanical

Ambient temperature
−20 to +70 °C
Medium temperature
−20 to +80 °C
Storage temperature
−40 to +120 °C
Relative humidity
0–80 %
Housing material
Stainless steel + aluminium alloy
Connection
Flange or thread
Ingress protection
IP65

Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.

Request the PDF datasheet →

Level Sensors & Transmitters

HPS100Submersible Level / Pressure Controller

5 relays, RS485

Five relay outputs plus RS485 Modbus and selectable analogue output, in the 100 mm round case. 0.5–300 m range, dual 24 V DC / 110–220 V AC-DC supply, high-brightness dual-row LED. For pump control with remote supervision.

Engineering reply · Evaluation samples available · Custom ranges built to order

  • Five relays plus RS485 Modbus
  • Dual-row high-brightness LED display
  • Drops into a standard 100 mm gauge cut-out
  • Accepts 24 V DC or 110–220 V AC-DC
  • Range 0.5–300 m

How it works

The HPS100 is the communications-equipped member of the family: five relays, RS485 Modbus for supervisory systems, and a 24 V DC or 110–220 V AC-DC supply so it can be dropped into an existing panel. The 100 mm round case takes the place of a standard pressure gauge, which makes it a straightforward retrofit where a mechanical gauge currently sits and someone has to walk out and read it. Dual-row LED display shows live value and set-points at the same time.

Typical applications

  • Replacing mechanical pressure gauges with a switched, reporting instrument
  • Pump control with SCADA supervision
  • Water network pressure and level monitoring

Not certain HPS100 is the right unit?

Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.

Same family

Other level instruments

View the family →