Linear Displacement Transducers
MPS10 Rod-Type Linear Transducer
0.05 % linearity

MPS10 technical data
Measurement
- Standard strokes
- 50 / 100 / 130 / 150 / 175 / 200 / 225 / 250 / 400 / 450 / 500 / 600 / 750 / 900 / 1000 / 1250 mm, custom to order
- Linearity
- 0.05 %
- Resolution
- 0.01 mm
- Temperature drift
- < 1.5 ppm/°C
- Maximum travel speed
- ≤ 5 m/s standard; ≤ 10 m/s high-speed
- Operating force
- ≤ 10 N (special version)
Electrical
- Supply voltage
- DC 24 V
- Output
- 4–20 mA / 0–5 V / 0–10 V
- Maximum current
- 20 mA
- Insulation resistance
- > 100 MΩ at 500 V
Mechanical
- Operating temperature
- −30 to +100 °C
- Storage temperature
- −50 to +120 °C
- Ingress protection
- IP65
Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.
Request the PDF datasheet →Linear Displacement Transducers
MPS10Rod-Type Linear Transducer
0.05 % linearity
Rod-type linear position transducer for direct coupling to a moving member. Strokes 50–1250 mm, 0.05 % linearity, 0.01 mm resolution, 100-million-cycle life, 4–20 mA or 0–10 V output, IP65.
Engineering reply · Evaluation samples available · Custom ranges built to order
- 0.05 % linearity, 0.01 mm resolution
- 100 million cycle life
- Strokes 50–1250 mm, custom to order
- Travel speed to 10 m/s
- 4–20 mA, 0–5 V or 0–10 V output
How it works
The MPS10 links a moving member to a resistive element through a rod, so the wiper position tracks the stroke directly. Linearity is 0.05 % and resolution 0.01 mm, which is enough for press depth, gate position and valve travel. The 100-million-cycle life comes from the contact design and the special laser trimming of the track; where the duty will exceed that, the non-contact MMS10 is the instrument to specify. Travel speed is up to 5 m/s in the standard version and 10 m/s in the high-speed version.
Typical applications
- Hydraulic cylinder and press stroke
- Gate and damper position
- Valve travel feedback
- Test rig displacement measurement
Not certain MPS10 is the right unit?
Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.
Same family
Other displacement instruments

Draw-Wire Displacement Transducer
50–20 000 mm
Draw-wire position transducer measuring up to 20 m from a compact housing where a rod will not fit. 0.05 % FS repeatability, 0.25 % FS linearity, 4–20 mA or 0–10 V, stainless 316L cable, IP65.
View specifications
Magnetostrictive Displacement Transducer
Non-contact, 0.002 % FS
Non-contact magnetostrictive position transducer with 0.005 % FS non-linearity and 0.002 % FS repeatability. Strokes 50–5000 mm, 4–20 mA, 0–10 V or RS485, explosion-proof, IP67. No wiper to wear out.
View specifications
Linear Displacement Sensor
50–1000 mm, 1 ms update
Linear displacement sensor with 50–1000 mm travel, 1 ms update time on four-wire connection, 0.05 % FS non-linearity and ±0.1 mm resolution. 4–20 mA or 0–10 V, aluminium housing, 304L rod, M12 five-pin connector.
View specifications
Magnetostrictive Displacement Sensor
25–2500 mm, 16-bit
Non-contact magnetostrictive position sensor, 25–2500 mm stroke, 16-bit D/A giving ±0.01 mm resolution on the voltage output. 1 ms update to 1 m stroke, 0.05 % FS non-linearity, IP67, −40 to +75 °C.
View specifications