Factory-direct manufacturer · Xiamen, China · Exporting worldwide

Linear Displacement Transducers

MMS10 Magnetostrictive Displacement Transducer

Non-contact, 0.002 % FS

Request a quote

MMS10 technical data

Measurement

Range
50–5000 mm, to customer specification
Non-linearity
0.005 % FS
Repeatability
≤ 0.002 % FS
Resolution
≤ 0.002 % FS
Hysteresis
≤ 0.002 % FS
Temperature effect
50 ppm/°C
Span adjustment
20 % FS
Zero adjustment
20 % FS

Electrical

Output
0–10 V, 4–20 mA or RS485
Supply voltage
DC 24 V
Cable
PVC screened cable

Mechanical

Operating temperature
−25 to +80 °C
Storage temperature
−40 to +100 °C
Sensor rod material
304 / 316 stainless steel
Electronic head material
304 / 316 stainless steel
Explosion protection
Exd IIB T (flameproof)
Ingress protection
IP67

Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.

Request the PDF datasheet →

Linear Displacement Transducers

MMS10Magnetostrictive Displacement Transducer

Non-contact, 0.002 % FS

Non-contact magnetostrictive position transducer with 0.005 % FS non-linearity and 0.002 % FS repeatability. Strokes 50–5000 mm, 4–20 mA, 0–10 V or RS485, explosion-proof, IP67. No wiper to wear out.

Engineering reply · Evaluation samples available · Custom ranges built to order

  • No contact with the sensing element — unlimited cycles
  • 0.005 % FS non-linearity, 0.002 % FS repeatability
  • Strokes 50–5000 mm
  • Reports position and velocity
  • Explosion-proof, IP67
  • Immune to shock, surge and RF interference

How it works

The MMS10 times a torsional pulse along a waveguide to a permanent magnet on the moving member. Nothing touches the sensing element, so there is no wiper to wear, no contact resistance to drift and no limit on the number of cycles — the reason magnetostrictive is used for injection-moulding clamps, servo-hydraulic actuators and any duty where a contact transducer would be replaced regularly. Non-linearity is 0.005 % FS and repeatability 0.002 % FS, roughly an order of magnitude better than a resistive rod.

Typical applications

  • Injection moulding machine clamp position
  • Servo-hydraulic actuator feedback
  • Roll gap control in rolling mills
  • High-cycle machine automation

Not certain MMS10 is the right unit?

Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.

Same family

Other displacement instruments

View the family →