Linear Displacement Transducers
MDS10 Draw-Wire Displacement Transducer
50–20 000 mm

MDS10 technical data
Measurement
- Range
- 50–20 000 mm
- Repeatability
- 0.05 % FS
- Linearity
- 0.25 % FS
- Cable tension
- ≥ 0.3 kg
Electrical
- Supply voltage
- DC 12–24 V
- Output
- 4–20 mA, 0–5 / 0–10 V, 0–5 kΩ
- Load impedance
- ≥ 5000 Ω (voltage); ≤ 750 Ω (current)
- Power consumption
- 1 W (current); 2 W (voltage)
- Insulation resistance
- ≥ 100 MΩ
Mechanical
- Cable material
- Stainless steel 316L
- Operating temperature
- −20 to +80 °C
- Storage temperature
- −50 to +120 °C
- Ingress protection
- IP65
Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.
Request the PDF datasheet →Linear Displacement Transducers
MDS10Draw-Wire Displacement Transducer
50–20 000 mm
Draw-wire position transducer measuring up to 20 m from a compact housing where a rod will not fit. 0.05 % FS repeatability, 0.25 % FS linearity, 4–20 mA or 0–10 V, stainless 316L cable, IP65.
Engineering reply · Evaluation samples available · Custom ranges built to order
- Up to 20 m measuring range
- Compact body — fits where a rod cannot
- Stainless 316L cable, 0.3 kg minimum tension
- 4–20 mA, 0–5 V, 0–10 V or 0–5 kΩ output
- IP65
How it works
A draw-wire transducer unreels a stainless cable from a spring-loaded drum and measures the rotation. Because the cable is flexible, the measuring range can be long while the body stays small — up to 20 m from a unit that fits in your hand. That makes it the practical choice for overhead cranes, telescopic booms, lift travel and anything where a 10 m rod is not an option. Linearity is 0.25 % FS and repeatability 0.05 % FS, so it is a positioning instrument rather than a metrology reference.
Ordering notes
- The cable is a wear item; route it to avoid abrasion at the exit and do not allow it to snap back unloaded.
Typical applications
- Overhead crane and hoist position
- Telescopic boom extension
- Lift and elevator travel
- Long-stroke test rigs
Not certain MDS10 is the right unit?
Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.
Same family
Other displacement instruments

Rod-Type Linear Transducer
0.05 % linearity
Rod-type linear position transducer for direct coupling to a moving member. Strokes 50–1250 mm, 0.05 % linearity, 0.01 mm resolution, 100-million-cycle life, 4–20 mA or 0–10 V output, IP65.
View specifications
Magnetostrictive Displacement Transducer
Non-contact, 0.002 % FS
Non-contact magnetostrictive position transducer with 0.005 % FS non-linearity and 0.002 % FS repeatability. Strokes 50–5000 mm, 4–20 mA, 0–10 V or RS485, explosion-proof, IP67. No wiper to wear out.
View specifications
Linear Displacement Sensor
50–1000 mm, 1 ms update
Linear displacement sensor with 50–1000 mm travel, 1 ms update time on four-wire connection, 0.05 % FS non-linearity and ±0.1 mm resolution. 4–20 mA or 0–10 V, aluminium housing, 304L rod, M12 five-pin connector.
View specifications
Magnetostrictive Displacement Sensor
25–2500 mm, 16-bit
Non-contact magnetostrictive position sensor, 25–2500 mm stroke, 16-bit D/A giving ±0.01 mm resolution on the voltage output. 1 ms update to 1 m stroke, 0.05 % FS non-linearity, IP67, −40 to +75 °C.
View specifications