Pressure Transmitters & Controllers
PCC216 Pressure Transmitter Controller
5 relays, 150 mm case

PCC216 technical data
Measurement
- Pressure range
- −0.1 to 0, and 0 to 60 MPa
- Sensor type
- Diffusion silicon, ceramic piezoresistive or ceramic capacitive
- Accuracy class
- 0.2 or 0.5
- Overload pressure
- 1.5× full-scale
- Sampling rate
- 4 readings per second
- Display range
- −1999 to 9999
- Power supply effect
- ≤ 0.1 % FS
Electrical
- Supply voltage
- DC 24 V, AC 220 V ±15 %
- Power consumption
- ≤ 5 W
- Analogue output
- 4–20 mA / 0–10 or 20 mA / 0–5 or 1–5 V DC
- Relay outputs
- 5 pairs
- Relay rating
- 3 A at 250 V AC, 3 A at 30 V DC
- Relay life
- > 100 000 operations
- A/D conversion
- 24-bit
Mechanical
- Ambient temperature
- −20 to +70 °C
- Medium temperature
- −20 to +80 °C
- Storage temperature
- −40 to +100 °C
- Relative humidity
- 0–80 %
- Housing material
- Stainless steel
- Connection
- G1/2, M20×1.5 or to order
- Ingress protection
- IP65
Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.
Request the PDF datasheet →Pressure Transmitters & Controllers
PCC216Pressure Transmitter Controller
5 relays, 150 mm case
Five relay outputs in a Φ150 mm gauge case, with dual 24 V DC / 220 V AC supply so it replaces a mechanical gauge in situ. −0.1 to 60 MPa, 0.2 accuracy class, high-brightness LED display, selectable analogue output.
Engineering reply · Evaluation samples available · Custom ranges built to order
- Φ150 mm case — replaces a standard gauge in situ
- Five relay outputs
- 24 V DC or 220 V AC supply
- −0.1 to 60 MPa
- Dual-row high-brightness LED
How it works
The PCC216 is built into a 150 mm round case — the size of a standard process pressure gauge — so it drops into an existing gauge mounting without a bracket or a panel cut-out. Five relays, a dual 24 V DC / 220 V AC supply and a bright LED display make it a direct functional replacement for a gauge that someone currently has to walk out and read, with alarm and interlock capability added at the same time. The 216 designation refers to the case size, not to a 216 mm dimension.
Typical applications
- Direct replacement of mechanical pressure gauges
- Booster and compressor control
- Water network pressure management
- Tank farm pump control
Not certain PCC216 is the right unit?
Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.
Same family
Other pressure instruments
Illustrative imagePressure Transmitter Controller
5 relays, Φ100 mm case
The 100 mm version of the pressure controller: five relays, −0.1 to 60 MPa, 0.2 accuracy class, LED display, selectable analogue output. Fits the cut-out a 100 mm mechanical gauge leaves behind.
View specifications
Differential Pressure Transmitter
0.2 class, 40:1 turndown
Differential pressure transmitter covering 0–0.2 kPa to 40 MPa with a 40:1 turndown and 0.2 accuracy class. Two-wire 4–20 mA, 750 Ω load, stainless housing, IP65. Built on a δ-cell capacitive sensor with a 0.10 mm measuring diaphragm.
View specifications
Differential Pressure Transmitter
Bidirectional, 2088 housing
Bidirectional differential pressure transmitter spanning −100 kPa to 200 kPa, in the standard 2088 housing with a liquid-crystal head. Two-wire 4–20 mA or three-wire 1–5 V, 0.2 accuracy class, stainless body, IP65.
View specifications
Differential Pressure Transmitter
Compact stainless body
Compact differential pressure transmitter, −100 kPa to 200 kPa, in a small stainless body for tight installation space. Two-wire 4–20 mA or three-wire 1–5 V, 0.2 accuracy class, G1/2 or M20×1.5, IP65.
View specifications