Level Sensors & Transmitters
HMS10 Magnetostrictive Level Transmitter
High accuracy

HMS10 technical data
Measurement
- Range
- 50–5000 mm, to customer specification
- Non-linearity
- 0.005 % FS
- Repeatability
- ≤ 0.002 % FS
- Resolution
- ≤ 0.002 % FS
- Hysteresis
- ≤ 0.002 % FS
- Temperature effect
- 50 ppm/°C
- Span adjustment
- 20 % FS
- Zero adjustment
- 20 % FS
Electrical
- Output
- 0–10 V, 4–20 mA or RS485
- Supply voltage
- DC 24 V
- Cable
- PVC screened cable
Mechanical
- Working temperature
- −25 to +80 °C
- Storage temperature
- −40 to +100 °C
- Rod material
- 304 / 316 stainless steel
- Electronic head
- 304 / 316 stainless steel
- Explosion protection
- Exd IIB T (flameproof)
- Ingress protection
- IP67
Values are for the standard configuration. Ranges, threads, probe lengths and output types outside this table are available on request — the datasheet revision for a custom build is issued with the quotation.
Request the PDF datasheet →Level Sensors & Transmitters
HMS10Magnetostrictive Level Transmitter
High accuracy
Non-contact magnetostrictive level transmitter, 50–5000 mm, with 0.005 % FS non-linearity and 0.002 % FS repeatability — an order of magnitude better than reed-chain instruments. 4–20 mA, 0–10 V or RS485 output, explosion-proof, IP67.
Engineering reply · Evaluation samples available · Custom ranges built to order
- 0.005 % FS non-linearity, 0.002 % FS repeatability
- Non-contact — nothing to wear
- 4–20 mA, 0–10 V or RS485 output
- Explosion-proof, IP67
- Also reports velocity and interface
How it works
Magnetostrictive measurement sends a current pulse down a waveguide and times the return twist produced where the float's magnet sits. There is no contact between the float and the sensing element, so nothing wears and accuracy does not degrade with use — non-linearity is 0.005 % FS and repeatability 0.002 % FS, which is roughly ten times better than a reed chain. Because the waveguide reports position and velocity, the same instrument can serve custody-transfer-adjacent duties and interface measurement in a tank with two liquids. Explosion-proof construction and a 316 stainless rod make it suitable for fuel and chemical service.
Typical applications
- Fuel and solvent tank gauging
- Interface measurement between two liquids
- High-accuracy process vessels
- Tanks where drift-free measurement is required
Not certain HMS10 is the right unit?
Send the medium, range, process connection and the signal your control system accepts. We will confirm the model — or tell you which one fits better — before you commit to an order.
Same family
Other level instruments

Rod Float Level Switch
1–4 set-points
Discrete level switch with one to four magnetic reed points on a stainless guide rod. Passive dry contacts need no power supply, and the reed elements never touch the liquid. Rod diameter 9–25 mm, pressure to 6.3 MPa, temperature to 150 °C.
View specifications
Rod Float Level Switch
Extended body
The HWS20 shares the HWS10's reed-on-rod principle with a longer, heavier-duty body for deeper tanks and wider mounting spans. Same passive dry-contact output, 1–4 set-points, 6.3 MPa and 150 °C ratings.
View specifications
Illustrative imageCable Float Level Switch
SPDT, 15 A
Injection-moulded float on a flexible rubber cable, switching 15 A at 250 V AC through an SPDT contact. Suits long cable runs, multiple points on one drop, submersible pumps and media carrying granular solids. IP68, specific gravity above 0.6.
View specifications
Magnetic Level Gauge
Top-mounted
Direct-reading magnetic flip gauge for top mounting, 200–6000 mm range, 10 MPa and up to 450 °C. Red-and-white flip column needs no power; a 4–20 mA transmitter and magnetic memory switches can be added for remote indication and alarms.
View specifications